Print guide
How to format a paperback for Amazon KDP
A paperback interior has to match KDP's print specification exactly, or the file is rejected. These are the settings that matter, in the order you need to decide them.
By the Real Self Publishing formatting team · Updated 8 min read
Key takeaways
- KDP paperbacks need two PDFs: an **interior** at your trim size and a wraparound **cover** with back, spine, and front.
- The most common trim sizes are 5 x 8, 5.5 x 8.5, and 6 x 9 inches.
- The inside (gutter) margin grows with page count, from 0.375 inches for books up to 150 pages.
- Add 0.125 inches of **bleed** only if images or color run to the edge of the page.
- Spine width is page count multiplied by a paper factor: 0.002252 inches per page for white paper, 0.0025 for cream.
Step 1: Choose a trim size
Trim size is the finished size of the printed page. Decide it first, because every other setting depends on it.
| Trim size (inches) | Typically used for |
|---|---|
| 5 x 8 | Novels, novellas, memoirs |
| 5.25 x 8 | Fiction; a slightly wider page |
| 5.5 x 8.5 | Fiction and general non-fiction |
| 6 x 9 | Non-fiction, business books, longer novels |
| 8.5 x 11 | Workbooks, manuals, textbooks |
A larger page lowers the page count and so the printing cost; a smaller page makes a short book feel more substantial. Look at comparable books in your genre before you choose.
Step 2: Set the margins
The inside margin, called the gutter, must widen as the book gets thicker, because more of the page curves into the spine. KDP's minimums are:
| Page count | Minimum inside (gutter) margin | Minimum outside margins |
|---|---|---|
| 24 to 150 | 0.375 in | 0.25 in (0.375 in with bleed) |
| 151 to 300 | 0.5 in | 0.25 in (0.375 in with bleed) |
| 301 to 500 | 0.625 in | 0.25 in (0.375 in with bleed) |
| 501 to 700 | 0.75 in | 0.25 in (0.375 in with bleed) |
| 701 to 828 | 0.875 in | 0.25 in (0.375 in with bleed) |
Step 3: Decide whether you need bleed
Bleed means an image or background color runs right to the edge of the page. Because trimming is never perfectly exact, the artwork must extend 0.125 inches past the trim line so no white sliver shows.
- No bleed: text-only books and books whose images sit inside the margins. Set the page to the trim size exactly.
- Bleed: picture books, photo books, and any book with edge-to-edge images. Set the page 0.125 inches wider and 0.25 inches taller than the trim size.
Step 4: Lay out the interior
- Start each chapter on a new page, with the chapter title set lower on the page
- Put page numbers and running heads in the margins, and leave them off blank pages and chapter openers
- Use roman numerals or no numbers for front matter, and start page 1 at the first chapter
- Order the front matter conventionally: title page, copyright page, dedication, contents
- Justify body text and turn on hyphenation so word spacing stays even
- Avoid widows and orphans, single lines stranded at the top or bottom of a page
- Use images at 300 dpi at the size they will be printed
- Make the total page count even; KDP's minimum is 24 pages
Step 5: Export the print-ready PDF
- Export to PDF at the exact page size (trim size, or trim size plus bleed).
- Embed all fonts.
- Do not add crop marks or printer's marks.
- Flatten transparency and layers.
- Open the PDF and check the page size and that every page appears as intended.
- Upload it and review every page in KDP's Print Previewer before approving.
Step 6: Build the cover
The paperback cover is a single PDF laid out as back cover, spine, front cover, with 0.125 inches of bleed on every outside edge. The spine width depends on your final page count and paper:
| Paper | Spine width | Example: 300 pages |
|---|---|---|
| Black and white, white paper | Page count x 0.002252 in | 0.676 in |
| Black and white, cream paper | Page count x 0.0025 in | 0.75 in |
| Color paper | Page count x 0.002347 in | 0.704 in |
Full cover width is bleed + back cover + spine + front cover + bleed. For a 6 x 9 inch book with 300 pages on white paper, that is 0.125 + 6 + 0.676 + 6 + 0.125 = 12.926 inches wide by 9.25 inches tall. KDP's cover calculator produces a template with these measurements for you. KDP prints spine text only on books of more than 79 pages.
Using the same files on IngramSpark
An interior PDF built carefully for KDP usually works on IngramSpark too. The cover does not: IngramSpark uses different paper and its own template, so the spine width differs. Generate a cover template from each printer and build a cover for each.
If you'd rather not typeset it yourself
Our paperback and print formatting service delivers a print-ready interior PDF from $149, or $249 with a full wraparound cover. Publishing the eBook too? See Kindle formatting.
Want it done for you?
Hand-formatted Kindle and ePUB files from $45, with unlimited revisions. See your exact price in seconds.
Frequently asked questions
What margins does KDP require for a paperback?
KDP requires at least 0.25 inches on the outside edges (0.375 inches if the book has bleed) and an inside margin that depends on page count: 0.375 inches up to 150 pages, 0.5 inches up to 300, 0.625 inches up to 500, 0.75 inches up to 700, and 0.875 inches above that.
What is the best trim size for a KDP paperback?
For fiction, 5 x 8 or 5.5 x 8.5 inches. For non-fiction, 6 x 9 inches. These are standard sizes that readers expect and that keep printing costs reasonable.
How do I calculate spine width for KDP?
Multiply the page count by 0.002252 inches for white paper, 0.0025 inches for cream paper, or 0.002347 inches for color paper. A 300-page book on cream paper has a 0.75 inch spine.
Can I upload a Word document for a KDP paperback?
KDP accepts Word files for paperbacks, but a PDF is more reliable because it locks the layout. With a Word file, page breaks and fonts can shift during conversion.
Do I need bleed for a novel?
No. A text-only book doesn't need bleed. Use it only when images or background color run to the edge of the page.
